The price of wood floor is often higher, and because they are made of natural wood, the later corrosion resistance and strong aging characteristics are not so satisfactory. Therefore, some manufacturers have launched floor sample boarding similar to the one described below, as the name implies They are made of a variety of wood fibers and some advanced raw materials through processing and mixing. What is the specific appearance of the floor sample board? How to choose in the process of purchasing floor sample board?

1. What is the floor sample board like? How to choose?

First, material type: because the underground heating is conducted directly by the ground materials, the heated floor will have subtle changes in the heat conduction process, and its moisture content will be reduced by 5%. Therefore, it is suitable to select the wood type of medium hardness substrate with an air-dry density of 6-8. To observe whether the floor is the same kind of wood, whether the board surface has cracks, decay, sandwich skin, dead joint, wormhole, mildew, and other defects.

2. specifications: underground heating mode has been widely used in Japan and South Korea, and the floor thickness is mainly 8mm. According to the living environment and heating conditions in northern China, the thickness should be 12-15mm, which has both foot feeling and heat dissipation. Length and width should be short rather than long, narrow rather than wide. Relatively speaking, the width and length of the floor are directly proportional to its deformation probability and degree, which should be paid attention to. The saying that the thicker the better is not only a waste of resources and energy but also affects the transmission of heat energy.

3. topcoat: floor in the processing process, in addition to material selection, drying, heat sealing, tenoning, the choice of topcoat is also very important. At present, there are two kinds of floor finish coatings on the market, which are roller coating and spray coating. The conventional paint types are UV and PU. UV paint is more wear-resistant, PU paint adhesion is strong, if not for the oil-based plate, choose UV paint is better. The hardness and wear resistance of the paint can not be compared. The car tire is made of rubber, but it does not mean that it is not wear-resistant.

4. color: the floor paved room floor is an integrated body composed of thousands or even tens of thousands of pieces of floor. The different colors and patterns are caused by sapwood, heartwood, earlywood, latewood, root, tip, sun and shade of wood. It is an inevitable process of wood formation and a masterpiece of nature. It can reflect the real, natural, and noble taste Over selection. According to the room area, daylighting, furniture color, decoration style, choose a light, neutral, dark color board, but do not choose the colored floor.

Compared with other solid wood floor made of purely natural wood material, composite wood floor adopts composite materials, including some wood fiber and some solid and solid basic products, which can improve the defects of wood floor to a certain extent. In addition, the color, size, and price distribution of the floor sample board are also very rich. Interested consumers may refer to the above to understand the purchase plan, and believe it can achieve satisfactory results.