HomeProducts
All products
  • floor end cap
    Floor End Cap
    Product Name:SPC Floor End Cap Size(mm):2400*35*8mm Packing:25PCS/CTNS Description: SPC floor end cap molding is used to create a smooth transition between a floor surface and carpet or a sliding glass door.
    Inquiry Now
  • flush mount stair nose
    FLOOR PARTNER FLUSH STAIRNOSE-FPFS72-01
    Product Name: Flush Mount Stair Nose Size(mm): 2400*72*25mm Packing: 10PCS/CTN Description Flush mount stair nose molding molding is used to finish the flooring at edge of a step to create a one-piece effect.
    Inquiry Now
  • spc stair nose
    FLOOR PARTNER OVERLAP STAIRNOSE FPOS115-01
    Product Name: SPC Stair Nose Size(mm): 2400*115*25mm Packing: 10PCS/CTN Description SPC Stair Nose Molding is used to finish the flooring at edge of a step to create a transition of the step edge. It’s easier to install compared flush stair nose.  
    Inquiry Now
  • square edge stair nose
    FLOOR PARTNER FPSQ28 QUARTER ROUND
    Product Name:SPC Quarter Round Molding Size(mm):2400*28*15mm Packing:30PCS/CTN   Description SPC Quarter Round Molding is used to conceal small irregularities in your floor. There are always some places where the floor dips slightly, causing a gap where the floor meets the wall.  
    Inquiry Now
  • SPC Solid Round Stair Treads Dimension
    SPC Solid Round Stair Tread
    All Molding New Material is professional for providing different stair treads dimension. The spc solid round stair treads dimension is 1220*300*24mm.
    Inquiry Now
  • spc stair nose
    SPC WPC OVERLAP STAIRNOSE
    WPC OVERLAP STAIRNOSE Product Name: WPC Stair Nose Size(mm): 2400*55*18mm Packing: 10PCS/CTN Description SPC Stair Nose Molding is used to finish the flooring at edge of a step with a tampering back solution. The advantage is it can suit floor with a range of different height
    Inquiry Now
  • metal display tower
    Display Rack METAL RACK-02
    AMD ME-02 Metal Display Tower is adjustable and suitable for smaller size sample boards. Usually the metal display tower is put against the wall due to its height.
    Inquiry Now
  • floor strap set
    Display Sample Sets-02
    AMD SS-02 This floor strap set is the most normal type of sample sets, but also can shows the characteristic of the products. The floor strap set is easier to make and the cost will be lower than the premium one.
    Inquiry Now
  • floor sample board
    Display Hand Board-02
    AMD HB-02 This floor sample board has a medium density fiber back board and the well-paved floor are adhered on it with a hole left that can be carried by hand,and it is portable.Any logos and labelscan be added on it.
    Inquiry Now
  • flush mount stair nose
    FLOOR PARTNER FLUSH STAIRNOSE-FPFS81-01
    Product Name: SPC Stair Nose Size(mm): 2400*81*35mm Packing: 8PCS/CTN Description SPC Stair Nose Molding is used to finish the flooring at edge of a step to create a one-piece effect.
    Inquiry Now
  • flush mount stair nose
    FLOOR PARTNER FLUSH STAIRNOSE-FPFS113-01
    Product Name: SPC Stair Nose Size(mm): 2400*113.5*25.5mm Packing: 8PCS/CTN Description Flush mount stair nose molding molding is used to finish the flooring at edge of a step to create a one-piece effect.
    Inquiry Now
  • wooden floor skirting
    FLOOR PARTNER SKIRTING-FPSS80-01
    Product Name: SPC Skirting Size(mm):2400*82*15mm Packing: 10 PCS/CTN Description SPC wooden floor skirting is installed by pressing it down against the wall and nailing or gluing it tightly so it covers up the expansion gaps. Skirting also can be used along with quarter round. But skirting should be carefully chosen because different skirting height will make reduce the room height visually.
    Inquiry Now
  • stair treads dimension
    SPC Hollow Round Stair Tread
    All Molding New Material is a factory engaged in the design and selling of various stair treads dimension. The spc hollow round stair treads dimension is 1220mm*295*25mm
    Inquiry Now
  • metal display rack
    Display Rack METAL RACK-01
    Metal display tower is widely used in construction materials, furnitures plastic products, cosmetics shops. The metal display tower has the advantages of green environmental protection, convenient transportation, rapid assembly and so on.
    Inquiry Now
  • wooden floor skirting
    FLOOR PARTNER SKIRTING FPWS110-01
    Product Name: WPC Skirting Size(mm):2400*98*12mm Packing: 10 PCS/CTN Description WPC wooden floor skirting is installed by pressing it down against the wall and nailing or gluing it tightly so it covers up the expansion gaps. Skirting also can be used along with quarter round. But skirting should be carefully chosen because different skirting height will make reduce the room height visually.
    Inquiry Now
  • metal display rack
    Display Rack METAL RACK-03
    AMD ME-03 Waterfall rack is suitable for smaller size sample boards. Usually is put against the wall due to its height.
    Inquiry Now
  • floor strap set
    Display Sample Sets-01
    AMD SS-01 This floor strap set is wrapped with cardboard around them and it can protect the floor strap set and show the information about the products on it. It is a high-level sample set and the cost will be a little higher compared with normal sample sets.
    Inquiry Now
  • floor sample board
    Display Hand Board-01
    AMD HB-01 This floor sample board is a MDF back and you can plaste what you want on in,it can be DIY with yourselves. Any labels and logo can be added on floor sample board.
    Inquiry Now
  • Floor Sample Board
    Display Board-01
    Floor Sample Board AMD DB-01 This floor sample board has a medium density fiber back board and the well-paved floor are adhered on it with a hole left that can be put on the display rack. Any logos and labelscan be added on it.
    Inquiry Now
  • square edge stair nose
    FLOOR PARTNER FPWQ28 QUARTER ROUND
    Product Name:WPC Quarter Round Molding Size(mm):2400*28*15mm Packing:30PCS/CTN   Description Square edge stair nose is used to conceal small irregularities in your floor. There are always some places where the floor dips slightly, causing a gap where the floor meets the wall. Quarter round is installed by pressing it down against the floor and nailing or gluing it tightly to the wall or baseboard so it covers up these gaps. Quarter round always creates a smooth edge and a nice visual touch. It also makes your floor easier to clean.  
    Inquiry Now
CopyRight © 2013-2021   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet