How to use a metal display tower? The following points should be paid attention to in the use of metal display tower:

1. General oil stains and dirt can be sprayed and dried with dry towels. It is forbidden to use a high concentration of corrosive solvent to scrub.

2. When cleaning the metal surface, care must be taken not to scratch the surface and avoid using the detergent containing bleaching components and abrasives. In order to remove the washing liquid, clean water should be used to wash the surface at the end of washing.

3. If there are dust and dirt on the metal surface, it can be washed with soap, weak detergent, or warm water.

4. If the metal surface has a trademark or film, wash it with warm water and weak detergent, and scrub with sprinkling essence or organic solvent (ether, benzene, etc.) as a binder.

5. If the metal surface is covered with grease, oil, and lubricating oil, please wipe it with a soft cloth; after that, clean it with neutral detergent or ammonia solution.

6. If there are bleach and acid on the metal surface, it should be cleaned with water immediately, then cleaned with ammonia solution or neutral carbonated soda water solution, with neutral detergent or warm water.

7. If there are rainbow patterns on the metal surface, it is caused by excessive use of detergent or oil. Warm water and neutral detergent can be used to remove the rainbow pattern.

8. Rust caused by dirt eye on the metal surface can be washed with 8% nitric acid or grinding detergent, or with a special detergent.

9. Please wipe and clean with a soft cotton cloth or fluffy cloth during maintenance, do not use a steel ball or rough brush to clean, so as to avoid damaging the product surface.

10. add lubricating oil to the moving parts of metal parts every six months for maintenance. As long as we use the correct maintenance method, we can extend the service life of metal and keep it clean, bright, and gorgeous.