How to Maintenance Floor Sample Board
 Oct 20, 2020|View:754

Maintenance of the solid wood floor sample board

1. Scrub

Although the solid wood floor sample board is wood products, to avoid water penetration, but the daily scrubbing is also indispensable. When scrubbing the solid wood floor sample board, avoid excess moisture, and wipe cloth must remember to screw dry. When scrubbing, you can also use a vacuum cleaner. First, use a vacuum cleaner to absorb dust on the surface, and then use a soft cloth to dip in a special detergent or soap flake diluent for cleaning.

2. Antifouling

The steps to prevent dirt in the maintenance of solid wood floor sample boards should not be less. Wax the floor every two or three months to protect the paint film and delay aging. Before waxing, remember to remove dust according to the way of scrubbing, and then dip in wax with a clean soft cloth that does not lose hair. Starting from the edge of the wood floor, do the circular wiping on the board surface in turn. After wiping it evenly, use the original Rag (no longer dipping wax) to wipe the edge of the original wipe in sequence according to the above scheme.

3. Painting

The paint will fall off for a long time, which will affect the beauty of the floor, so it is necessary to paint the floor every few years. Before painting, also remember to polish and remove dust and decontaminate the board surface. After painting will make the ground more smooth, clean, and bright.

4. Heat protection

If the solid wood floor sample board is baked by the sun, it will crack, especially if there is someone on the ground who is baked by high temperature, the cracking phenomenon will be more serious, so the floor with water should not only be wiped dry in time but also avoid the floor by the sun exposure, heater baking, etc.

floor sample board 

Maintenance of composite floor sample board

1. Vacuuming

Usually, we can use a broom or vacuum cleaner to clean the dust on the surface. After that, we can use a dry cloth to soak some water and wring it dry or take a nondripping cloth or mop to wipe the floor surface. After our initial cleaning, it is best to open the doors and windows, let the air circulate, and blow the floor dry as soon as possible.

2. Decontamination

For some special stains, we need some special methods to clean. For example, oil stains, paint, ink, and so on, we can use a special oil to wipe, if it is blood, juice, red wine, beer, and other residual stains, we can use a wet cloth or a cloth dipped inappropriate amount of floor cleaner to wipe.

If there is wax and chewing gum on the surface, we can put ice on it for a while to freeze it, then scrape it gently, then wipe it with wet cloth or cloth dipped with an appropriate amount of floor cleaner. Do not use strong acid-base liquid to clean the composite wood floor.

3. Protection

Usually, when we walk on the floor, it is best to wear home slippers, not to wear outdoor shoes into the room, and not to directly wear high-heeled shoes on it. And we'd better stick the soft bottom protective pad on the "feet" of the furniture, so as to avoid the "feet" of the furniture from scratching the wear-resistant layer of the floor, and don't let the heavy objects break the wear-resistant layer.

CopyRight © 2013-2024   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet