Operation Manual-Multifunctional Flooring Cutter
 Dec 29, 2023|View:447

Set Up


1. Installation of the cutter(1)

Install the table to the cutter base with provided screws and bolts as shown.

Warning: Do not put your fingers againsts the sharp edge of the blade at any time.



微信图片_20220914170316.png


2. Installation of the cutter(2)

Fix the handle with the screws and wrench provided.

Warning: Do not put your fingers againsts the sharp edge of the blade at any time.


微信图片_20220914170329.png


3. Cutting Preparation

(1) Adjust the angle attachment to desired angle as needed.

(2) The angle attachment can be used on left side of the tables as shown.

Warning: Do not put your fingers againsts the sharp edge of the blade at any time.


微信图片_20220914170331.png



    Cutting


1. Straight Cutting

(1) Insert material between the cutting blade and the base, flush with the angle attachment as shown and hold the material with foot then push handle down to complete a cut.

(2) Blade cutting maximum width: 240mm

(3) Blade cutting maximum depth: 10mm

Warning: Maintain control of the handle. Do not allow handle to slam back after making a cut.


微信图片_20220922142854.png


2. 45° Cutting

(1) Swing the angle attachment to 45°. Insert material between the cutting blade and the base, against the angle attachment as shown, then push handle down to complete a cut.

(2) Blade cutting maximum width is 169mm when angle cut 45°.

Warning: Maintain control of the handle. Do not allow handle to slam back after making a cut.


微信图片_20220922142859.png



    Maintenance


1. Changing the blade

Use the provided wrench to remove the five screws, then hold the blade by each end and carefully move the blade out of blade holder.

Note: the flat side fo the blade facing the table.

Warning: Do not put your fingers against the sharp edge of the blade.


微信图片_20220922142902.png


2. Carry

Close the latch on the cutter head and carry the cutter as shown.


微信图片_20220922142905.png


CopyRight © 2013-2024   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet