Anti-slip on Flush Mount Stair Nose

1. Anti-slip concave groove

When decorating, polish the groove on the edge of the pedal, which can play the role of anti-skid. This may be the simplest way, and it doesn't need to add anything. However, if you don't pay attention to maintenance, it may cause great wear to the groove line, and then the groove will become shallow and reduce the skid resistance. Moreover, the groove is difficult to clean, but most people will use this method.

2. Inlaid metal strip

Many people's stairs will also be inlaid with metal strips on the edge of the stone surface of the stairs, such as copper. The metal strips should be slightly higher than the stone surface, so as to play an anti-skid role. However, if it is not done well, it may become loose quickly. After loosening, the glue is also difficult to deal with, so you should be careful when doing it and pay attention to maintenance at ordinary times.

3. Antiskid sand strip

Two or three anti-skid sand strips can be pasted on the edge of the stair pedal, but if it is used for a long time, it may be desanded and affect its effect. Moreover, when you want to remove and replace it, the glue is difficult to clean.

Non-slip blanket

Some people think that spreading the whole carpet is too wasteful, and they will choose the block ladder blanket. The ladder blanket is generally glued to the stairs. Before paving, clean the stairs, determine the laying position, and then pave and paste. Do not trample at will within 2 hours.

5. Particle paste method

This kind of pedal is mainly suitable for glass. Metal particles are pasted on the surface of the pedal. Although the anti-skid effect is good and the appearance is good, it is easy to fall off after long-term trampling, and the construction is difficult, so professional workers are required.

6. Carpet antiskid

Although carpet laying is very practical and can improve the level, cleaning is not very convenient.