Molding Installation Guide-End Cap
 Sep 01, 2022|View:437


Step 1 


Install the flooring planks including the underlayment by leaving a 1-1/8”inch  (28mm) gap for the installation of the End Cap molding.


微信图片_20220901132739.png


Step 2 


Center the U-track between the carpet and the flooring planks and screw it to the sub-floor by using #6x5/8”screws.

微信图片_20220901132749.png


Step 3


Gently press the molding into the track starting from one end to the other. NOTE: Do not try to push the entire molding in at once by pressing it in from the top.


微信图片_20220901132752.png

CopyRight © 2013-2024   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet