How to install SPC T-molding ?
 Nov 30, 2023|View:448

T-Moldings are commonly used in doorways to join two  floors in adjoining rooms. Also recommended when making a transition from  floor to another floor that is approximately the same height.

Step 1

Install the flooring planks including the underlayment by

leaving a 1″-1.2” inch (25-30mm) gap for the installation

of the T-molding.

Step 2

Center the U-Track and Shim between the two vinyl floors and screw them to the sub floor by using screws.

Step 3

Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag.1”!!! Do not try to push the entire molding in all at once

by just pressing it in from top !!!


CopyRight © 2013-2024   Jiangsu All Molding New Material Co., Ltd  All rights reserved    Sitemap  All tags   Designed by Zhonghuan Internet