Reducers are used to transition from flooring to floors of different height with

a minimum height difference of 1/4 inch.

Installation Instructions

Step 1

Install the flooring planks including the underlayment

by leaving a 1”-1.2″ inch (25-30mm)from the vinyl

and step edge for the installation of the stair nose

Step 2

Center the U-Track and Shim between the space floors and and step edge. screw them to the sub floor by using screws.

Step 3

Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag.1”!!! Do not try to push the entire molding in all at once .by just pressing it in from top !!!