Many of the metal display tower will rust after a long time of use. Once rusted, the iron will be corroded and easily damaged. Of course, if the shelf is so easy to rust, then the manufacturer is too irresponsible, in the production process must be short of weight, save some process. However, there is no such worry in our metal display tower. The products are strictly in accordance with the national standards and the production process is strict, so as to prevent the rust and quality problems caused by the production process. If you buy this kind of inferior display rack, how to remedy it? How to clean and deal with the rust on the metal display tower?

Metal Display Tower

Acid pickling paste can be used to remove rust spots on the surface of metal display rack, which can improve the surface smoothness of metal display rack, form a dense and complete passivation film with strong adhesion on the surface of storage shelf, which can effectively prolong the service life of metal display tower. It is suitable for chemical machinery, food machinery, printing and dyeing machinery, pharmaceutical machinery, pressure vessel manufacturing and drying equipment, chemical equipment And chemical equipment installation industry use, engineering components and other surface treatment.

How to Deal with Rust on Metal Display Tower?

During the operation, the pickling paste is applied on the surface of the metal display tower. The film thickness is 0.5-2mm. The general reaction time is more than 3-10 minutes. When it is used below 0 ℃ or where the oxide scale is thick, the time should be appropriately extended. During the treatment, it is better to brush the surface several times. After the surface oxide skin is completely removed, rinse it with clean water (lime water or alkaline water is better) to avoid rust When water appears, don't pour it out. Shake or mix well before use.