What is a flush mount stair nose

The flush mount stair nose, is in the decoration construction the same material or the different material joint decoration processing, is in the decoration design most can manifest the detail beautiful place, many classical cases are thought-provoking, has a lot to do with the delicate handling of the details of the stair seals. Designers do not understand the design of the flush mount stair nose, just as doctors do not know how to bandage, not only will expose the wound, corner received damage, but also affect the aesthetic.

The function of stair seal

Decoration of flush mount stair nose is finished through the decorative surface of the edge, corner and the connection part, in order to make up for the shortcomings of decoration to increase the decorative effect. On the one hand, it refers to the splice joint of the seal of the facing stairs and the treatment of the seal of the stairs On the other hand, it refers to carries on the decoration with the specialized material to the decoration surface transition position to enhance the decoration effect.

Handling method of flush mount stair nose

Generally speaking, the methods of decorating the seal of stairs mainly include pressing edge, staying seam, touching joint, tenon joint and so on. These methods should be chosen according to the style of design, the grade of decoration, the nature of materials and the form of components.

1. Press side stair seal method

Blank-holding staircase seal is the most basic and commonly used method for decorating staircase seals. This method can be used for staircase seals between different facing materials and between different structures it materials or components of one over another material or components to achieve the stair seal entry. There are several ways to handle the blank-holding stair seals:

A finish that is easy to process or handle hides a finish that is difficult to process. Choose easy in the construction site processing or treatment of the decorative surface as a cover surface. The covering material is treated so that the construction joint is more rigorous and the labor is saved. When the stair seal material is not suitable to be processed and the stair seal seam is difficult to be dense, caulking glue is needed to handle the stair seal seam.

When plastering wall body and steel door stair seal, use steel door frame press plastering to seal stair because steel door frame is easier to form beautiful. If plastering face is used to cover steel door frame, on the one hand plastering is very difficult to shape, construction is more difficult; on the other hand plastering layer is also very difficult to adhere to the steel surface. Therefore, the steel door frame pressure plastering layer is the best construction method. However, when the steel door frame and stone wall of the staircase seal, the texture of the two materials are relatively hard, if the requirements of the two staircases seal joints must be strictly consistent, construction time-consuming and labor-consuming, extremely difficult; therefore, we use caulk glue to deal with the stairs seal seam, which can greatly reduce the construction difficulty, but also can make the surface have a certain degree of shrinkage.

Covers the possible displacement without displacement. In the decoration construction, the facing often needs a certain expansion space because of the distortion To avoid the extrusion or the crack decoration surface. These parts of the staircase seal with blank-holding method, to the lower surface may be deformed to leave a certain amount of expansion space. It can avoid the deformation of the seal seam of the stairs.

Covering the decorative face which needs the staircase seal with the decorative component simplifies the treatment of the decorative face in the position of the staircase seal, greatly reduces the labor cost and improves the work efficiency. When using decorative thread to seal stairs, there are some quality problems, such as empty drum, falling off, etc. Therefore, in addition to the use of adhesive fixation, we should also try to use screws, nails and other reinforcement. If you can not use screws, nails and other reinforcement because of the requirements of the veneer, you should try to increase the decorative line and the surface contact area or use dowels to hold it in place.

2. Sewing stair seals

Slotted stair seal method is to leave a certain width gap between adjacent materials or components for stair seal. This method of sealing the stairs can be used in two ways:

Stronger material for stair seals. For hard materials, especially for large volumes, it is difficult to maintain a tight joint with the seal of a closed-seam staircase. Therefore, materials with a harder texture and larger specifications, such as stone, glass, etc. , the way of stair seal is usually to leave the seam stair seal. When the material size is small, the use of slotted stair seals can make the decorative surface appear neat and beautiful, but will increase the construction of artificial. Whether to leave a seam is generally determined by the design requirements and style of the designer. If the material size error is large, the accumulated error can be avoided by leaving the seam properly. The size of the seal joint of the staircase is determined according to the size of the material.

Another type of slotted stair seal is determined by the architect’s design style and is used to separate different components, or to separate different parts of the building. This kind of stairs seal is actually a comprehensive use of a variety of stairs seal method to make a certain width of stairs seal seam or split seam, to achieve the goal of stairs seal. This kind of gap is not only a kind of staircase seal construction technology, but also a design style.

3. Touch and connect stair seals

The method of touching stair seal is widely used in the stair seal of wood facing material or stone wall. The method is usually to plane the touching edge of wooden components into a certain angle and then lap each other. The wooden veneer touches the stair seal to appear generally in the large area wood veneer, the sun angle wood veneer and so on lap joint position. It should be noted that due to the use of glue and other adhesive parts for fixing, strength is not high; and the wood is easy to deform with the change of temperature and humidity, and the warping hollow deformation is easy to occur at the joint position. When warping hollow deformation, you can use the needle will be injected into the hollow part of the glue, and then flat, fixed firmly.

4. Mortise and tenon method

The mortise and tenon stair sealing method is generally used in the thick wood veneer or solid wood stair sealing, which has certain strength. It is not only a method of stair sealing, but also a method of wooden construction connection. Generally, this method is only used in areas with special requirements, such as the splicing of wood.

5. Decorative strips, staircases, seals

This is the most popular, the most widely used and the most beautiful method of sealing stairs, which can meet the needs of all kinds of stair sealing. It can be adopted to stair seal processing on the ground, on the metope, or between ground and metope, even top face and metope material.  

Sealing method of wooden flush mount stair nose

1. Flush mount stair nose and batten

Stair seal press: PVC stair seal, solid wood stair seal, metal stair seal. Metal flush mount stair nose with aluminum alloy copper bar, PVC is also very simple, composite floor where there is to sell, directly with the color of the l-type can be close.

2. Service Stair Batten

Auxiliary Wood flush mount stair nose board practice is that with more than ten centimeters wide wood shop method, also use the diagram to show it. Use a stereogram. It is a little better to use this kind of practice for solid wood floor, but it may not be good to do so for compound floor. It is not good to ...big solid wood board directly on the cement ground. If you do above the floor heating shop composite board, then can be heated to the edge of the space for more than ten centimeters to do auxiliary wood on it.