Role of Metal Display Tower

Metal display towers are generally made of impermeable leaching metals, which are leached metals that are impermeable to gases or liquids under certain pressure conditions. Because of their excellent corrosion resistance, thermal stability, and temperature rapid change resistance, good mechanical processing, and pollution-free, they are widely used for heat and mass transfer in the industrial field. Containers and tower equipment made from them are mostly used for storage, synthesis, combustion, mixing, absorption, and separation of corrosive media, such as HCL gas absorption tower, hydrochloric acid desorption tower, organic matter purification tower, etc. However, because metals are brittle materials, there are towers made from immersed metals, especially large diameter towers, which have low-pressure resistance, which limits their application. The requirement of lightning-proof earthing for the metal tower is very high. 1. The earthing resistance ohm should be below 4 and connected with the earthing body at least three places. Hot-dipped galvanized flat steel can be used to make the downline at the base of the tower at a specified angle and weld the foundation Earthing Grid firmly. If there is no foundation ground network, multiple hot-dipped galvanized angle sheets of steel can be used.